My Cart:

0 item(s)
You have no items in your shopping cart.


Welcome to our online store!

HP ProLiant BL460c Gen8 Blade Server 641016-B21 CTO 10GB FLB BAREBONE

$79.99 $33.33

Availability: 87 item(s)

Estimate Shipping Cost

Enter your destination to get a shipping estimate


For proper functionality you must already have a working HP BladeSystem c3000 or c7000 Enclosure to be able to power up, use and operate this blade server correctly!

HP ProLiant BL460c Gen8 10Gb FlexibleLOM Blade Server CTO BASE MODEL BAREBONE 641016-B21, NO CPUs, NO RAM, NO HDD, NO HEATSINKS

• Up to two (2) Intel® Xeon® E5-2600 family processors
• Intel® C600 Series Chipset

• Sixteen (16) DDR3 DIMM memory slots (8 per processor)
• Up to 512GB (16 x 32GB) up to 1333MHz, using PC3-10600 DDR3 registered (RDIMM) memory

Storage Controller:
• One (1) HP Smart Array P220i Controller with 512MB Flash-Backed Write Cache (FBWC) supporting RAID 0 and RAID 1

Internal Drive Support:
• Two (2) hot-plug small form factor (SFF) drive bays; support for SAS, SATA, and SSD hot-plug hard drives

Network Controller:
• One (1) HP FlexFabric 10Gb 2-port 554FLB FlexibleLOM (NOTE: Supports FCoE, Flex-10, TCP/IP offload engine, hardware-based accelerated iSCSI, iSCSI boot, and autosensing 10Gb/1Gb Ethernet. NOTE: Each port is autosensing 1Gb/10Gb, and can interoperate with 1Gb HP BladeSystem c-Class interconnect components. Both ports will operate at the same speed. NOTE: FlexFabric and Fibre Channel over Ethernet (FCoE) capabilities require the use of an HP Virtual Connect FlexFabric module or HP 10GbE Pass-Thru Module.)

Mezzanine Support:
• Two (2) I/O expansion mezzanine slots:
• x16 PCIe 3.0 Type A (supports Type A mezzanine cards) (expansion slot 1). NOTE: This expansion slot supports dual-port mezzanine cards: one port is routed to interconnect module bay 3 and the other to bay 4.
• x16 PCIe 3.0 Type B (supports Type A and Type B mezzanine cards (expansion slot 2). NOTE: This expansion slot supports dual-port and quad-port mezzanine cards. For dual-port cards, one port is routed to interconnect module bay 5 and the other to bay 6.For quad-port cards, one port is routed to interconnect module bay 5, one to bay 6, one to bay 7, and one to bay 8. NOTE: A second processor must be installed (in processor slot 2) to have access to the second expansion slot (expansion slot 2).
• Mezzanine card options include: Dual-port 10Gb FlexFabric and10Gb Flex-10 for additional network ports, Dual-port 8Gb Fibre Channel HBA for SAN connectivity, QDR and FDR InfiniBand for low latency and high bandwidth server interconnectivity

Form Factor:
• HP ProLiant BL460c Gen8 is a half-height server blade that plugs into the HP BladeSystem c3000 and c7000 enclosures

MORE INFO → https://h20195.www2.hpe.com/v2/gethtml.aspx?docname=c04123239&ver=44


Condition Seller refurbished
Brand HP
Type Server
Product Line ProLiant BL
Processor Manufacturer Intel
Number of Processors 0
Model BL460C Gen8
RAM Size N/A
Form Factor Blade
Interface Ethernet
Network Connectivity Ethernet
Network Management Type Fully Managed
Network Type Ethernet
MPN 641016-B21
Maximum RAM Capacity 768GB
Number of WAN Ports N/A
Processor Type Xeon
RAID Levels 0, 1, 1+0
Memory Type DDR3 SDRAM
Processor Speed N/A
Country/Region of Manufacture Unknown
Manufacturer Warranty None
Generation 8th Generation
Condition Description An item that has been professionally restored to working order by a manufacturer or manufacturer-approved vendor. This means the product has been inspected, cleaned, and repaired to meet manufacturer specifications and is in excellent condition. This item may or may not be in the original packaging.