Details
Up for sale is a used Cisco ASR1002-X IPBase ASR Series Aggregation Service Router.
It has been tested and is in good working condition.
Console Output:
Router#show version
Cisco IOS XE Software, Version 03.16.08.S - Extended Support Release
Cisco IOS Software, ASR1000 Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version
15.5(3)S8, RELEASE SOFTWARE (fc2)
.........
ROM: IOS-XE ROMMON
Router uptime is 2 minutes
Uptime for this control processor is 3 minutes
System returned to ROM by reload
System image file is "bootflash:asr1002x-universalk9.03.16.08.S.155-3.S8-ext.SPA
.bin"
Last reload reason: PowerOn
..........
If you require further assistance please contact us by sending email to
export@cisco.com.
License Level: ipbase
License Type: Permanent
Next reload license Level: ipbase
cisco ASR1002-X (2RU-X) processor (revision 2KP) with 1065619K/6147K bytes of me
mory.
Processor board ID
6 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
6684671K bytes of eUSB flash at bootflash:.
Configuration register is 0x2142 (will be 0x2102 at next reload)
Router#
Router#show inv
NAME: "Chassis", DESCR: "Cisco ASR1002-X Chassis"
PID: ASR1002-X , VID: V02,
NAME: "Power Supply Module 0", DESCR: "Cisco ASR1002 AC Power Supply"
PID: ASR1002-PWR-AC , VID: V03,
NAME: "Power Supply Module 1", DESCR: "Cisco ASR1002 AC Power Supply"
PID: ASR1002-PWR-AC , VID: V03,
NAME: "module 0", DESCR: "Cisco ASR1002-X SPA Interface Processor"
PID: ASR1002-X , VID: , SN:
NAME: "SPA subslot 0/2", DESCR: "1-port 10 Gigabit Ethernet Shared Port Adapter
XFP based"
PID: SPA-1X10GE-L-V2 , VID: V04,
NAME: "subslot 0/2 transceiver 0", DESCR: "OC192 + 10GBASE-L"
PID: XFP10GLR-192SR-L , VID: A ,
NAME: "SPA subslot 0/3", DESCR: "1-port 10 Gigabit Ethernet Shared Port Adapter
XFP based"
PID: SPA-1X10GE-L-V2 , VID: V04,
NAME: "subslot 0/3 transceiver 0", DESCR: "OC192 + 10GBASE-L"
PID: XFP10GLR-192SR-L , VID: A ,
NAME: "SPA subslot 0/0", DESCR: "6-port Built-in GE SPA"
PID: 6XGE-BUILT-IN , VID: , SN:
NAME: "module R0", DESCR: "Cisco ASR1002-X Route Processor"
PID: ASR1002-X , VID: V02,
NAME: "module F0", DESCR: "Cisco ASR1002-X Embedded Services Processor"
PID: ASR1002-X , VID: , SN:
It has been tested and is in good working condition.
Console Output:
Router#show version
Cisco IOS XE Software, Version 03.16.08.S - Extended Support Release
Cisco IOS Software, ASR1000 Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version
15.5(3)S8, RELEASE SOFTWARE (fc2)
.........
ROM: IOS-XE ROMMON
Router uptime is 2 minutes
Uptime for this control processor is 3 minutes
System returned to ROM by reload
System image file is "bootflash:asr1002x-universalk9.03.16.08.S.155-3.S8-ext.SPA
.bin"
Last reload reason: PowerOn
..........
If you require further assistance please contact us by sending email to
export@cisco.com.
License Level: ipbase
License Type: Permanent
Next reload license Level: ipbase
cisco ASR1002-X (2RU-X) processor (revision 2KP) with 1065619K/6147K bytes of me
mory.
Processor board ID
6 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
6684671K bytes of eUSB flash at bootflash:.
Configuration register is 0x2142 (will be 0x2102 at next reload)
Router#
Router#show inv
NAME: "Chassis", DESCR: "Cisco ASR1002-X Chassis"
PID: ASR1002-X , VID: V02,
NAME: "Power Supply Module 0", DESCR: "Cisco ASR1002 AC Power Supply"
PID: ASR1002-PWR-AC , VID: V03,
NAME: "Power Supply Module 1", DESCR: "Cisco ASR1002 AC Power Supply"
PID: ASR1002-PWR-AC , VID: V03,
NAME: "module 0", DESCR: "Cisco ASR1002-X SPA Interface Processor"
PID: ASR1002-X , VID: , SN:
NAME: "SPA subslot 0/2", DESCR: "1-port 10 Gigabit Ethernet Shared Port Adapter
XFP based"
PID: SPA-1X10GE-L-V2 , VID: V04,
NAME: "subslot 0/2 transceiver 0", DESCR: "OC192 + 10GBASE-L"
PID: XFP10GLR-192SR-L , VID: A ,
NAME: "SPA subslot 0/3", DESCR: "1-port 10 Gigabit Ethernet Shared Port Adapter
XFP based"
PID: SPA-1X10GE-L-V2 , VID: V04,
NAME: "subslot 0/3 transceiver 0", DESCR: "OC192 + 10GBASE-L"
PID: XFP10GLR-192SR-L , VID: A ,
NAME: "SPA subslot 0/0", DESCR: "6-port Built-in GE SPA"
PID: 6XGE-BUILT-IN , VID: , SN:
NAME: "module R0", DESCR: "Cisco ASR1002-X Route Processor"
PID: ASR1002-X , VID: V02,
NAME: "module F0", DESCR: "Cisco ASR1002-X Embedded Services Processor"
PID: ASR1002-X , VID: , SN: