Details
Eaton PDUMH15ATNET ATS Automatic Transfer Switch Rackmount PDU 120V Single-Phase
Item is Used with Normal Wear and Tear, Tested and Working.
INPUT
Item is Used with Normal Wear and Tear, Tested and Working.
INPUT
- Input Phase: Single-Phase
- PDU Input Voltage: 120
- Recommended Electrical Service: Two single-phase 15A 120V circuits
- Maximum Input Amps: 12
- Maximum Input Amps Details: Agency de-rated to 12A continuous
- PDU Plug Type: (2) NEMA 5-15P
- Input Cord Details: Set of 2 inputs enable connection to separate PRIMARY and SECONDARY power sources
- Input Cord Length (ft.): 12
- Output Capacity Details: 1.44kW (120V) / 12A total capacity; 12A max per outlet
- Frequency Compatibility: 50 / 60 Hz
- Output Receptacles: (8) 5-15R
- Output Nominal Voltage: 120V
- Customized Load Management Receptacles: 8 individually switched output receptacles
- Front Panel LCD Display: Digital display reports total PDU output current in amps
- Switches: Reset button for LX Platform management card will reboot card without affecting the connected equipment.
- LED Indicators: 8 LEDs display power on-off status for each output receptacle, plus 2 additional LEDs to indicate input power status for primary and secondary inputs. Pre-installed WEBCARDLX provides Ethernet Link and Status LED's for network activity along with a system status LED for monitoring system operation.
- Material of Construction: Metal
- Rack Height: 1U
- Form Factors Supported: 1U rackmount
- Minimum Required Rack Depth (inches): 17.5
- PDU Form Factor: Horizontal (1U)
- Unit Dimensions (hwd / in.): 1.750 x 17.500 x 14.500
- Unit Weight (lbs.): 11.00
- Operating Temperature Range: 32° to 104°F (0° to 40°C)
- Storage Temperature Range: -22° to 122°F (-30° to 50°C)
- Relative Humidity: 5% to 95% non-condensing
- Operating Elevation: 0-10000 ft. (0-3000 m)
- PowerAlert Software: LX Platform Interface: PowerAlert Device Manager
- Communications Cable: Micro-USB- to-USB A configuration/console Access cable
- Network Monitoring Port: RJ45 Network port, Micro-USB Configuration port, USB A port supports a variety of Envirosense2 environmental and control modules. See Accessories>Management Hardware section for more information about these modules.
- SNMP Compatibility: Pre-installed LX platform interface provides remote monitoring via Java-free HTML5 web interface, telnet, SSH and SNMP management systems
- Network Compatibility: 10 Mbps; 100 Mbps (Fast Ethernet)
- Grounding: Rear grounding lug
- High Availability PDU Features: Auto Probe Monitoring and Reboot (included); Auto-Transfer Switching; Auto Load Shedding
- Product Certifications: CSA (Canada); NOM (Mexico); UL 60950-1
- Product Compliance: RoHS; FCC Part 15 Class A (USA); Trade Agreements Act (TAA)
Specifications
Condition Description | An item that has been restored to working order by the eBay seller or a third party not approved by the manufacturer. This means the item has been inspected, cleaned, and repaired to full working order and is in excellent working condition. This item may have cosmetic blemishes and may or may not be in original packaging. See the listing description for full details. |
---|