Details
The NC532m is a Flex -10 enabled 10 Gigabit Ethernet network adapter for the ProLiant c-Class BladeSystem. The adapter is a dual port 10GbE mezzanine, that when paired with the new 10Gb Virtual Connect Module provides up to eight physical function NICs that can be configured to operate at any speed from 100Mbs to 10Gbs. The NC532m will also support 10Gb connections when paired with the ProCurve 6120XG Blade Switch. The adapter ships with support for VLAN tagging, QoS, teaming (bonding), Receive Side Scaling (RSS) and PXE.
The NC532m adapter is supported in most ProLiant c-class server Type I and II mezzanine slots allowing customers to provision their servers with unprecedented bandwidth never before available in a blade.
• Supported per ProLiant c-Class server, in mezzanine slots 2 or 3 (full height servers) or slot 2 (half height servers). Supported in any available slot on BL495 and all Gen 6 servers
• Type I Adapter/Mezzanine
• Supports HP's exclusive Flex-10 technology
• IEEE 802.1p QoS 802.3x flow control, and 802.3ap 10GBase-KR
• 4K Jumbo frames
• Dual 10Gb ports offer up to 40Gb/s bidirectional theoretical throughput
• Set any bandwidth from 100Mb to 10Gb on up to four "Physical Function " NICs per port
Dual-port 10 Gigabit Ethernet Throughput
The 20,000 Mbps full duplex Ethernet transfer rate per port (40 Gbps aggregate full duplex) delivers outstanding network performance that improves response time and removes bottlenecks required for the next generation data center. Ten Gigabit Ethernet bandwidth is ideal for high performance computing, database clusters, iSCSI storage, storage backups, grid systems, virtualization, server and I/O consolidation, fabric consolidation, and more.
HP Virtual Connect Flex-10 10Gb Ethernet Module for the c-Class BladeSystem
Evolve 10Gb at your own speed! When paired with the HP Virtual Connect Flex-10 10Gb Ethernet Modules, take advantage of the Flex Nics, which are PCI Physical Function devices that are OS independent.
• Server ROM recognizes them as individual NICs
• Speeds can be set per NIC from 100Mb to 10Gbs in 100Mb increments
• Three fold increase in number of network connections per port.
• Up to four physical function NICs per port
Network processor: Broadcom 57711
Data rate: Two ports, each at 20 Gbps full duplex; 40 Gbps aggregate full duplex theoretical bandwidth. Note that each port on the NC532m adapter transmits from the server at only 20 Gbps (theoretical) full duplex.
Bus type: PCI Express v2.0 (Gen 2) x8
Form factor: The NC532m is a Type I card, however it is not supported in Mezzanine slot one of Gen 1 and G5 servers with the exception of the BL495. It is compatible in any slot on all G6 servers.
The NC532m adapter is supported in most ProLiant c-class server Type I and II mezzanine slots allowing customers to provision their servers with unprecedented bandwidth never before available in a blade.
• Supported per ProLiant c-Class server, in mezzanine slots 2 or 3 (full height servers) or slot 2 (half height servers). Supported in any available slot on BL495 and all Gen 6 servers
• Type I Adapter/Mezzanine
• Supports HP's exclusive Flex-10 technology
• IEEE 802.1p QoS 802.3x flow control, and 802.3ap 10GBase-KR
• 4K Jumbo frames
• Dual 10Gb ports offer up to 40Gb/s bidirectional theoretical throughput
• Set any bandwidth from 100Mb to 10Gb on up to four "Physical Function " NICs per port
Dual-port 10 Gigabit Ethernet Throughput
The 20,000 Mbps full duplex Ethernet transfer rate per port (40 Gbps aggregate full duplex) delivers outstanding network performance that improves response time and removes bottlenecks required for the next generation data center. Ten Gigabit Ethernet bandwidth is ideal for high performance computing, database clusters, iSCSI storage, storage backups, grid systems, virtualization, server and I/O consolidation, fabric consolidation, and more.
HP Virtual Connect Flex-10 10Gb Ethernet Module for the c-Class BladeSystem
Evolve 10Gb at your own speed! When paired with the HP Virtual Connect Flex-10 10Gb Ethernet Modules, take advantage of the Flex Nics, which are PCI Physical Function devices that are OS independent.
• Server ROM recognizes them as individual NICs
• Speeds can be set per NIC from 100Mb to 10Gbs in 100Mb increments
• Three fold increase in number of network connections per port.
• Up to four physical function NICs per port
Network processor: Broadcom 57711
Data rate: Two ports, each at 20 Gbps full duplex; 40 Gbps aggregate full duplex theoretical bandwidth. Note that each port on the NC532m adapter transmits from the server at only 20 Gbps (theoretical) full duplex.
Bus type: PCI Express v2.0 (Gen 2) x8
Form factor: The NC532m is a Type I card, however it is not supported in Mezzanine slot one of Gen 1 and G5 servers with the exception of the BL495. It is compatible in any slot on all G6 servers.
Specifications
Condition | Seller refurbished |
---|---|
Brand | HP |
Model | NC532m |
MPN | 466308-001 |
Compatible Port/Slot | PCI Express x8 |
Max. Downstream Data Rate | 10Gbps |
Interface Card Type | MEZZ |
Country/Region of Manufacture | United States |
Condition Description | Pulled out of working machine, Tested. |